Flotec FPZT7450 Sump Pump, 115 V, 7.5 A, 1-1/2 in Outlet, 420 gph
Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6300 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.
Superior Pump 92341 Sump Pump, 120 V, 4.1 A, 1-1/2 in Outlet, 46 gpm
1/3 hp split capacitor motor, high efficiency, low draw, rugged cast iron construction, 10 ft grounded water proof power cord, pumps up to 46 gpm, 2760 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co.
Goulds 3 HP 1 Phase 230V centrifugal Self-Priming Pump
Goulds 3 HP 1 Phase 230V centrifugal Self-Priming Pump is designed so that once the pump is primed it never needs priming again, even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe. Specifically designed for lawn sprinkling, irrigation, air conditioning systems, heat pumps, water transfers and dewatering. Pump body has a cast iron casing. Pump has Stainless Steel wear ring for longer life and resistance to wear. Impeller is F.D.A. compliant and glass filled Noryl.
>>>> Application:
Water Systems
>>>> Features:
Shaft: Uses Motor shaft, 300 Series Stainless Steel
Shaft Seal: Standard Mech. Seal is Buna/Carbon/Ceramic/S.S, Casing "O"-Ring is Buna
Ports: 1-1/2" NPT Inlet x 1-1/2" NPT Discharge
1/2HP PUMP GOULDS
The Goulds LB0512 booster pump can achieve up to 20 GPM at 3500 RPM, and is perfect for use at your car or pressure washing business. It has a single phase, 0.5 HP motor and open drip proof motor enclosure design. A 115/230 volt electrical connection is required for operation.
Part of the LB series
Maximum flow: 20 GPM
Maximum pressure: 85 PSIG
Maximum speed: 3500 RPM
Maximum temperature: 140? F
0.5 HP, 60 Hz
Single phase
4.5" Noryl impeller
Open drip proof motor enclosure
Stainless steel casing
115/230 volts
Suction: 1.25" NPT
Discharge: 1" NPT
Heads to 190 feet
Goulds item #LB0512